Lacquer DOLPHIN K
DOLPHIN K - VARNISH FOR STONE AND MINERAL SURFACES SILICON ORGANIC
For impregnation, protection and creation of a wet effect on surfaces: natural and artificial stone, brick and ceramic tiles, clinker and ceramic tiles, concrete products, asbestos-cement and cement-fiber boards, gypsum, wood products, wood-fiber materials and chipboard. It is recommended for hydrophobization and protection of facades and socles of residential buildings, industrial structures, blind areas, paths and platforms of natural and artificial stone, concrete FEM, etc. It is also used for the restoration and preservation of architectural monuments.
“Dolphin K” varnish is characterized by ultra-deep penetration into porous mineral surfaces with a powerful strengthening effect.Provides long-term operation of the coating, as well as resistance to mechanical stress, the action of water, oils and aggressive liquids. It is also recommended for strengthening and dust removal of concrete floors, including those for industrial use, reinforced concrete and other structures before painting with acrylic organ-soluble paints. For varnishing of wooden surfaces without polishing, as well as the restoration of damaged paintwork. For the processing of metal products that are operated at temperatures up to 200 ° C (mixed with PAP-2 aluminum powder in a ratio of 100: 5 to 350 ° C), for example, in mechanical engineering: exhaust pipes, tracked vehicle injectors, boiler parts, flue pipes and wire ends. When applied in several layers, the product forms an independent weather-resistant protective and decorative coating with the effect of "wet stone". The resulting coating has all the necessary properties for complete protection against aggressive atmospheres, moisture, salts, oils and gasoline, and heat resistance.
Composition: the product is a modified organo-silicone resin in a mixture of organic solvents. Available in the form of varnish.
- Excellent weather resistance.
- Ultra deep penetration.
- Powerful firming action.
- Increased thermal, moisture, and gas resistance.
- The polymerized varnish film is non-toxic, fireproof.
|Conditional viscosity, s||12-17|
|Mass fraction of nonvolatile substances,%||15-17|
|Acid number, mg KOH / g varnish||no more than 1,0|
|The drying time of the film to a degree of 3, min||no more than 120|