Hydrophobic Nano-Impregnator LOTUS
Hydrophobic Nano-Impregnator LOTUS, 1 L
Deep penetration with a droplet effect without changing the primary color of the surface!..
700 uah
Hydrophobic Nano-Impregnator LOTUS, 5 L
Deep penetration with a droplet effect without changing the primary color of the surface..
3400 uah
Hydrophobic Nano-Impregnator LOTUS, 10 L
Deep penetration with a droplet effect without changing the primary color of the surface!..
6500 uah
Application: serves to protect from moisture, dirt and stains of various surfaces: natural and artificial stone, ceramic and clinker bricks, ceramic unglazed tiles, tile joints, various types of plasters, gypsum, concrete products. It is used to impregnate wood products: terrace and floorboards, beams, facade elements and roofing. Also suitable for granite, marble, travertine, limestone and sandstone surfaces. Does not form a film. Practically does not change the color of the surface.
Application: mix thoroughly (shake) so that there is no sediment at the bottom of the container. Apply in 2 layers on a dry, cleaned surface until it is completely saturated. The next layer is applied after complete drying (absorption) of the previous one. It is applied with a brush, rags, sponge, spray guns of all types. After the final surface treatment with the product, limit the access of moisture, as well as mechanical impact on the surface for 24 hours after application. Apply at temperatures below 0 oC. Work in a well-ventilated room or outdoors. In case of skin contact, wash off with warm water and soap.
Consumption: 150-400 g per 1 m2 of surface depending on its porosity.
Composition: dearomatized aliphatic hydrocarbons, silicon-organic compounds, aerosil-nano.
Storage conditions and safety: Keep in a dark ventilated room at a temperature not higher than 40 oC. Caution! Flammable liquid! Keep away from fire and direct sunlight!
Environmentally friendly product. Suitable for both indoor and outdoor use!