Oleofobizator “Delphin O” Protection against water, fats and oils 0.5 L

312072349_w640_h640_brisck
91434232_w640_h640_dolphino-180×9691434439_w640_h640_stoneoil1w-180×18091434444_w640_h640_stoneoil3w-180×180

Purpose: treatment for mineral porous surfaces made of natural stone (marble, granite, sandstone, slate, limestone, travertine, etc.) and ceramic products. It has a water-repellent, repelling grease and oil effect. It prevents the formation of spots. For indoor and outdoor use.

Composition: silicone emulsion Water-based additives.

Color: Transparent

Flow rate: 1 to 10 m2 dependent on the porosity of the surface.

It is necessary to cover the 2 layers.

In some cases the process to complete saturation of the surface until the drop-repellent effect. Processing of porous stones require pre-soaking agent Dolphin-C, to strengthen the surface of the stone with a loose structure.

Surface preparation: the treated surface to remove dirt, dust and particle tight, clean from grease and oil. The surface must be dry.

Use: Apply with a brush, sponge, spray, roller until full saturation of the surface, preferably in 2 layers. The second layer is applied after the full drying of the first. Apply at temperatures above + 5 ° C.

Drying time at + 20 ° C and 65% relative humidity for 30 minutes to 1 hour. Full coverage polymerization occurs within hours after application.

Packaging: 0.5 liters.

Storage: Store in tightly closed containers at temperatures between + 5 ° C to + 25 °