LAC DELFIN K 1 liter.



Instructions for use:
The surface must be necessarily pre-cleaned from mechanical impurities, water-soluble salts, fats, oils, rust and old paint traces having a weak grip. Cleaning is done manually, mechanically, or shot-blasting (blasting) method. Cleaning allows to obtain the desired heat resistance and adhesion. The product is stirred before use and maintained until no more air bubbles. staining modes specified in each case depending on the operating conditions and the application method. The number of layers is determined by the coating thickness of a single layer coating, obtained according to the method of application, the total coating thickness and on the polymerization conditions. Stone, brick, concrete, asbestos cement, plaster, cement-sand the surface is usually painted in three layers. Metal surfaces are painted in a 2-3 cross layers with intermediate drying between coats "to touch" - 0.5-2.0 hours depending on the ambient temperature. When negative ambient temperature holding time is increased by 2-3 times. The product dries up to 3 degrees, depending on humidity and temperature for 2-3 hours. final drying the coating at a temperature (20 ± 2) ° C - at least 24 hours. Otverzhdevaetsya product completely when heated during operation (in the case of processing metal products). Theoretical consumption when the product is applied with a coating thickness of 20-40 microns is 120-150 g / m2, excluding technological losses. If necessary dilution using xylene, toluene, solvent (Nefras A-130/150).
Storage: Store in a tightly closed container at a temperature of 5 ° C to + 40 ° C.
Shelf life: 12 months