Impregnation Dolphin ECO 1L.

delphinC1l

Impregnation for stone and ceramic surfaces "Dolphin-C"

Purpose: it is used to protect ceramic (clinker), brick, concrete, gypsum, plastered surfaces, natural stone, marble, slate, ceramic tiles, thus forming a hydrophobic coating. It contributes to the continuation of the life of the base, a significant decrease in the formation of fungi and mold, sensitivity to freeze-thaw cycles, a decrease in heat transfer. The treated surface is resistant to detergents, greatly facilitating the removal of dirt and stains. The product gives the surface a slight luster and color saturation, the surfaces become more attractive. For interior and exterior use! Environmentally friendly product!

Composition: aqueous emulsion of acrylic copolymers with organosilicon additives.

Properties: has a high adhesion coefficient (excellent adhesion to the surface). Forms a coating that is resistant to the effects of precipitation and temperature changes.

Emulsion color: milky.

Surface preparation: remove dirt, dust and loose particles from the surface to be treated, and remove grease and oil.

Method of use: apply with a brush, spray, roller until the surface is completely saturated. Apply at a temperature of at least + 5 ° C, since the product is water-based.

Drying time: at a temperature of + 20 ° С and humidity of air of 65% from 30 minutes to 1 hour.

Consumption: approximately 50 - 150 g / m² depending on the porosity of the surface.

Specifications:

1) film appearance: homogeneous, without foreign inclusions;

2) mass fraction of non-volatile substances,%, not less than: 10;

3) conditional viscosity according to the viscosimeter VZ-246 with a nozzle diameter of 4 mm at temperature

(20 ± 2) ° С, с: 7 - 12;

4) Drying time to grade 3 at (20 ± 2) ° C, min: not more than 60.

Liters: 1 liter.

Storage: Store in tightly closed containers at temperatures between + 5 ° C and + 25 ° C.